SimHub control
Last updated
Last updated
For SimHub control, there isn't really any additional code to be written, but you have to set things up to allow SimHub to make contact with your controller.
First you'll need to set up a VID/PID for the controller.
When you've uploaded the code, you can connect to SimHub:
Go to devices and add a new device.
Select "Create standard device"
Select standard LED device
Go to USB PID/VID configuration, edit the controllers VID and PID and set the correct LED count. This is all your strips combined.
You can also rename the device and change the picture by left-clicking it.
Reboot your controller and/or SimHub for SimHub to find it, press "Edit profile" under LEDs to start working with the RGB editor. You're all set!
